SF-280S FINGERLESS TYPE

Design speed: 100m/min
Effective width: 1400mm-1800mm
Corrugated roller: $280mm.
The drive gearbox is lubricated with oil to reduce noise, and is driven by universal joints to isolate the power source.
The lifting and lowering of the upper tile roller, pressure roller and glue roller are all controlled by pneumatics.
The paper guide method adopts vacuum adsorption and has an air volume adjustment device to maintain the stability of the corrugated type at high speed.

<br />

Design speed: 100m/min
Effective width: 1400mm-1800mm
Corrugated roller: $280mm.
The drive gearbox is lubricated with oil to reduce noise, and is driven by universal joints to isolate the power source.
The lifting and lowering of the upper tile roller, pressure roller and glue roller are all controlled by pneumatics.
The paper guide method adopts vacuum adsorption and has an air volume adjustment device to maintain the stability of the corrugated type at high speed.
Bearings of tile roller and pressure roller are lubricated with high temperature resistant grease.
The glue applicator adopts automatic circulation for glue supply.
The upper and lower corrugating rollers are made of 48CrMo high-quality chrome-molybdenum alloy steel, which has been heat-treated, and the hardness is ground on the surface of HRC580-600.
The surface of the coating roller is treated with anilox engraving and chrome plating. 11. Manual or electric glue separator.
The gluing part can operate independently or not independently when it stops, and the main motor is controlled by frequency conversion (optional).

Reviews

There are no reviews yet.

Be the first to review “SF-280S FINGERLESS TYPE”